Ngwa
Tricone bit bụ otu n'ime ihe ndị bụ isi maka oghere mgbawa na igwu olulu mmiri.Ogologo ndụ ya na arụmọrụ ya ma ọ dị mma maka ịkụ ala ma ọ bụ na ọ bụghị, nke nwere mmetụta dị ukwuu banyere àgwà, ọsọ na ọnụ ahịa nke oru ngo.
Mgbaji nkume site na tricone bit nke ejiri m mee ihe na-arụ ọrụ ma mmetụta nke ezé na ncha nke na-akpata site na nkwụsị nke ezé, nke na-eweta nnukwu ọrụ nkwụsịtụ nkume na ọnụ ala dị ala.
A na-ejikarị tricone bits nke JCDRILL mepụtara ma rụpụta ya maka nnukwu oghere oghere, dị ka ogbunigwe kol, igwe igwe, ogbunigwe ọla kọpa na molybdenum mines, yana ogbunigwe na-abụghị ọla, igwu mmiri nke ọma.N'ịbawanye ụdị dị iche iche, a na-ejikwa ya n'ọtụtụ ebe n'ịgba mgbawa, ikpochapụ ntọala, mkpọpu mmiri hydrogeological, coring, tunneling na ngalaba njem ụgbọ oloko na mkpọpu ala n'ime ogbunigwe n'okpuru ala.
Njirimara
Nhazi TCI tricone bits dị nro:
A na-eji obere nguzobe TCI tricone dị nro na-egwupụta ike mkpakọ dị ala, nhazi dị nro.Nke a kachasi ike iji ma conical na chisel tungsten carbide ntinye nke nnukwu dayameta yana ntule dị elu.Nhazi ihe owuwu a na-egbutu, jikọtara ya na mbelata cone kacha, na-ebute ọnụego ntinye ntakịrị.Ọgbara dị omimi nke ahịrị ndị na-egbu ihe na-egbochi ịgbapụta ntakịrị n'ụdị nnyapade.
Nhazi nke etiti TCI tricone ibe n'ibe:
Nhazi nke TCI tricone bits na-egosipụta mgbanye chisel tungsten carbide na-eme ihe ike na ahịrị ikiri ụkwụ na ahịrị dị n'ime.Nke a imewe na-enye a ngwa ngwa mkpọpu ihe ọnụego na kwukwara ọnwụ Ọdịdị anwụ ngwa ngwa na ọkara ka ọkara ike maka ition.Ring rọba HSN na-enye akara nke ọma maka ịdịte aka.
Nhazi siri ike TCI tricone bits:
Enwere ike iji obere nhazi TCI tricone siri ike mee ka ọkpụkpụ siri ike na nke abrasive.A na-eji ihe ntinye nke tungsten carbide na-eguzogide n'ahịrị ndị dị n'èzí iji gbochie mfu nke ihe nlele.A na-eji ọnụ ọgụgụ kacha elu nke ntinye ụdị hemispherical n'ahịrị niile iji nye ogologo ndụ na ogologo ndụ.
Ntuziaka nke nhọrọ Tricone Bit
| IDC | WOB (KN/mm) | RPM(r/min) | NKWUKWU NDỊ KWESỊRỊ |
| 114/116/117 | 0.3-0.75 | 180-60 | Nhazi dị nro nke nwere ike mkpakọ dị ala na nnukwu drillability, dị ka ụrọ, nkume apịtị, nzu, wdg. |
| 124/126/127 | 0.3-0.85 | 180-60 | Nhazi dị nro na ike mkpakọ dị ala na nnukwu drillability, dị ka mudstone, gypsum, nnu, limestone dị nro, wdg. |
| 134/135/136/137 | 0.3-0.95 | 150-60 | Akpụkpọ ụkwụ dị nro na nke ọkara na ike mkpakọ dị ala na nnukwu drillability, dị ka shale dị nro, gypsum siri ike, nkume nzu dị nro dị nro, nkume aja dị nro dị nro, nhazi dị nro na nke siri ike, wdg. |
| 214/215/216/217 | 0.35-0,95 | 150-60 | Nhazi nke etiti nwere ike mkpakọ dị elu, dị ka shale dị nro, gypsum siri ike, nkume nzu dị nro, nkume aja dị nro dị nro, nguzobe dị nro na nke siri ike, wdg. |
| 227 | 0.35-0,95 | 150-50 | Nhazi siri ike nke ọkara nwere ike mkpakọ dị elu, dị ka abrasive shale, limestone, sandstone, dolomite, gypsum siri ike, marble, wdg. |
| Mara: E kwesịghị iji oke oke WOB na RPM dị na tebụl dị n'elu mee ihe n'otu oge. | |||
Ntuziaka nke tricone Bits ChoiceỤdị nha nha nke Tricone
Nha ibe n'ibe
| Nha Bit | PIN REG API | Torque | Ibu | |
| Inch | mm | Inch | KN.M | Eze |
| 3 3/8 | 85.7 | 2 3/8 | 4.1-4.7 | 4.0-6.0 |
| 3 1/2 | 88.9 | 4.2-6.2 | ||
| 3 7/8 | 98.4 | 4.8-6.8 | ||
| 4 1/4 | 108 | 5.0-7.5 | ||
| 4 1/2 | 114.3 | 5.4-8.0 | ||
| 4 5/8 | 117.5 | 2 7/8 | 6.1-7.5 | 7.5-8.0 |
| 4 3/4 | 120.7 | 7.5-8.0 | ||
| 5 1/8 | 130.2 | 3 1/2 | 9.5-12.2 | 10.3-11.5 |
| 5 1/4 | 133.4 | 10.7-12.0 | ||
| 5 5/8 | 142.9 | 12.6-13.5 | ||
| 5 7/8 | 149.2 | 13.2-13.5 | ||
| 6 | 152.4 | 13.6-14.5 | ||
| 6 1/8 | 155.6 | 14.0-15.0 | ||
| 6 1/4 | 158.8 | 14.4-18.0 | ||
| 6 1/2 | 165.1 | 14.5-20.0 | ||
| 6 3/4 | 171.5 | 20.0-22.0 | ||
| 7 1/2 | 190.5 | 4 1/2 | 16.3-21.7 | 28.0-32.0 |
| 7 5/8 | 193.7 | 32.3-34.0 | ||
| 7 7/8 | 200 | 33.2-35.0 | ||
| 8 3/8 | 212.7 | 38.5-41.5 | ||
| 8 1/2 | 215.9 | 39.0-42.0 | ||
| 8 5/8 | 219.1 | 40.5-42.5 | ||
| 8 3/4 | 222.3 | 40.8-43.0 | ||
| 9 1/2 | 241.3 | 6 5/8 | 38-43.4 | 61.5-64.0 |
| 9 5/8 | 244.5 | 61.8-65.0 | ||
| 9 7/8 | 250.8 | 62.0-67.0 | ||
| 10 | 254 | 68.0-75.0 | ||
| 10 1/2 | 266.7 | 72.0-80.0 | ||
| 10 5/8 | 269.9 | 72.0-80.0 | ||
| 11 1/2 | 292.1 | 79.0-90.0 | ||
| 11 5/8 | 295.3 | 79.0-90.0 | ||
| 12 1/4 | 311.2 | 95.0-102. | ||
| 12 3/8 | 314.3 | 95.0-102.2 | ||
| 12 1/2 | 317.5 | 96.0-103.0 | ||
| 13 1/2 | 342.9 | 105.0-134.0 | ||
| 13 5/8 | 346.1 | 108.0-137.0 | ||
| 14 3/4 | 374.7 | 7 5/8 | 46.1-54.2 | 140.0-160.0 |
| 15 | 381 | 145.0-165.0 | ||
| 15 1/2 | 393.7 | 160.0-180.0 | ||
| 16 | 406.4 | 200.0-220.0 | ||
| 17 1/2 | 444.5 | 260.0-280.0 | ||
| 26 | 660.4 | 725.0-780.0 | ||
Ụlọ ọrụ TCI Tricone bits
| Ọnụ ego kacha nta | N/A |
| Ọnụ ahịa | |
| Nkọwa nkwakọ ngwaahịa | Ngwungwu mbupu ọkọlọtọ |
| Oge Mbuga ozi | 7 ụbọchị |
| Usoro ịkwụ ụgwọ | T/T |
| Ikike inye | Dabere na usoro zuru ezu |
