Okwu mmalite
4 1/2 inch Water Well Roller Cone Bit 114mm Steel Tooth Tricone Bit
The tricone drill bit bụ ihe kasị ewu ewu n'ụwa, ọ nwere ike ọtụtụ ebe maka mmanụ & gas mkpọ ala, Ngwuputa, mmiri ọma, geological exploration area.Our tricone drill bit na-ekewa n'ime metal akara na-egwupụta ihe na roba akara.
1. Ụgbọ elu C-centre nwere ike izere ịmepụta bọl na bit ahụ, wepụ mmiri mmiri na ala nke oghere ahụ, mee ka ọganihu elu nke mkpụrụ osisi dịkwuo elu ma melite ROP.
2. Akwa saturation NBR bearings nwere ike belata nrụgide mkpuchi ma melite ntụkwasị obi akara.
3. Nchekwa nlele na-eme ka nlele ahụ dịkwuo mma ma gbasaa ndụ ntakịrị.
4. Tinye ahịrị ezé n'etiti azụ azụ na mpụta iji belata oghere ma chebe taper.
Ntuziaka nke nhọrọ Tricone Bit
| IDC | WOB (KN/mm) | RPM(r/min) | NKWUKWU NDỊ KWESỊRỊ |
| 114/116/117 | 0.3-0.75 | 180-60 | Nhazi dị nro nke nwere ike mkpakọ dị ala na nnukwu drillability, dị ka ụrọ, nkume apịtị, nzu, wdg. |
| 124/126/127 | 0.3-0.85 | 180-60 | Nhazi dị nro na ike mkpakọ dị ala na nnukwu drillability, dị ka mudstone, gypsum, nnu, limestone dị nro, wdg. |
| 134/135/136/137 | 0.3-0.95 | 150-60 | Akpụkpọ ụkwụ dị nro na nke ọkara na ike mkpakọ dị ala na nnukwu drillability, dị ka shale dị nro, gypsum siri ike, nkume nzu dị nro dị nro, nkume aja dị nro dị nro, nhazi dị nro na nke siri ike, wdg. |
| 214/215/216/217 | 0.35-0,95 | 150-60 | Nhazi dị nro dị nro nwere ike mkpakọ dị elu, dị ka shale dị nro, gypsum siri ike, nkume nzu dị nro, nkume aja aja dị nro, nhazi dị nro nwere oghere siri ike, wdg. |
| 227 | 0.35-0,95 | 150-50 | Nhazi siri ike nke ọkara nwere ike mkpakọ dị elu, dị ka abrasive shale, limestone, sandstone, dolomite, hard gypsum, marble, wdg. |
| Mara: E kwesịghị iji oke oke WOB na RPM dị na tebụl dị n'elu mee ihe n'otu oge. | |||
Ntuziaka nke tricone Bits ChoiceỤdị nha nha nke Tricone
Nha ibe n'ibe
| Nha Bit | PIN REG API | Torque | Ibu | |
| Inch | mm | Inch | KN.M | Eze |
| 3 3/8 | 85.7 | 2 3/8 | 4.1-4.7 | 4.0-6.0 |
| 3 1/2 | 88.9 | 4.2-6.2 | ||
| 3 7/8 | 98.4 | 4.8-6.8 | ||
| 4 1/4 | 108 | 5.0-7.5 | ||
| 4 1/2 | 114.3 | 5.4-8.0 | ||
| 4 5/8 | 117.5 | 2 7/8 | 6.1-7.5 | 7.5-8.0 |
| 4 3/4 | 120.7 | 7.5-8.0 | ||
| 5 1/8 | 130.2 | 3 1/2 | 9.5-12.2 | 10.3-11.5 |
| 5 1/4 | 133.4 | 10.7-12.0 | ||
| 5 5/8 | 142.9 | 12.6-13.5 | ||
| 5 7/8 | 149.2 | 13.2-13.5 | ||
| 6 | 152.4 | 13.6-14.5 | ||
| 6 1/8 | 155.6 | 14.0-15.0 | ||
| 6 1/4 | 158.8 | 14.4-18.0 | ||
| 6 1/2 | 165.1 | 14.5-20.0 | ||
| 6 3/4 | 171.5 | 20.0-22.0 | ||
| 7 1/2 | 190.5 | 4 1/2 | 16.3-21.7 | 28.0-32.0 |
| 7 5/8 | 193.7 | 32.3-34.0 | ||
| 7 7/8 | 200 | 33.2-35.0 | ||
| 8 3/8 | 212.7 | 38.5-41.5 | ||
| 8 1/2 | 215.9 | 39.0-42.0 | ||
| 8 5/8 | 219.1 | 40.5-42.5 | ||
| 8 3/4 | 222.3 | 40.8-43.0 | ||
| 9 1/2 | 241.3 | 6 5/8 | 38-43.4 | 61.5-64.0 |
| 9 5/8 | 244.5 | 61.8-65.0 | ||
| 9 7/8 | 250.8 | 62.0-67.0 | ||
| 10 | 254 | 68.0-75.0 | ||
| 10 1/2 | 266.7 | 72.0-80.0 | ||
| 10 5/8 | 269.9 | 72.0-80.0 | ||
| 11 1/2 | 292.1 | 79.0-90.0 | ||
| 11 5/8 | 295.3 | 79.0-90.0 | ||
| 12 1/4 | 311.2 | 95.0-102. | ||
| 12 3/8 | 314.3 | 95.0-102.2 | ||
| 12 1/2 | 317.5 | 96.0-103.0 | ||
| 13 1/2 | 342.9 | 105.0-134.0 | ||
| 13 5/8 | 346.1 | 108.0-137.0 | ||
| 14 3/4 | 374.7 | 7 5/8 | 46.1-54.2 | 140.0-160.0 |
| 15 | 381 | 145.0-165.0 | ||
| 15 1/2 | 393.7 | 160.0-180.0 | ||
| 16 | 406.4 | 200.0-220.0 | ||
| 17 1/2 | 444.5 | 260.0-280.0 | ||
| 26 | 660.4 | 725.0-780.0 | ||
Tricone bits Production Line
| Ọnụ ego kacha nta | N/A |
| Ọnụ ahịa | |
| Nkọwa nkwakọ ngwaahịa | Ngwungwu mbupu ọkọlọtọ |
| Oge Mbuga ozi | 7 ụbọchị |
| Usoro ịkwụ ụgwọ | T/T |
| Ikike inye | Dabere na usoro zuru ezu |
1. Olee ọrụ anyị nwere ike inye?
Usoro nnyefe anabatara: FOB, CIF, EXW;
Ego ịkwụ ụgwọ anabatara: USD, CNY;
Ụdị ịkwụ ụgwọ anabatara: T/T, Kaadị kredit, L/C, Ego nkịtị;
Asụsụ Asụsụ: Bekee, Chinese
2. Ị nwere ike ịnye ọrụ OEM & ODM?
Ee, anabatara iwu OEM&ODM.
3. Enwere m ike ịga na ụlọ ọrụ mmepụta ihe gị?
Ji obi ụtọ nabata ileta ụlọ ọrụ anyị!
4. Ị bụ factory ma ọ bụ trading ụlọ ọrụ?
Anyị bụ ụlọ ọrụ mmepụta ihe yana ikike mbupụ.Ọ pụtara factory + trading.
5. Gịnị bụ oge nnyefe gị?
A: Nọmalị, oge nnyefe anyị bụ n'ime ụbọchị 30 mgbe nkwenye gasịrị.
6. Ị nwere ike inye aka chepụta artworks nkwakọ ngwaahịa?
Ee, anyị nwere ọkachamara mmebe chepụta niile nkwakọ artworks dị ka onye ahịa anyị arịrịọ.
