Isi atụmatụ
1. Enwere Tricone kwesịrị ekwesị maka nhazi nkume ọ bụla
2. Tricone bit bụ vasatail na ike ijikwa mgbanwe formations
3. Tri Cones bụ ọnụ ahịa ezi uche dị na ya, na-adịte aka ma nwee ọnụego mkpọpu nke ọma
4. The roller cones nwere elu njedebe akara bearings;tungsten carbide dị oke elu na nchekwa nlele diamond n'oge a na-egwupụta ihe yana ọdụ sket siri ike na-eche ihu na hydraulic kachasị mma.A na-emepụta ihe ndị a na-eme mkpọtụ ka ọ gaa na omimi dị oke egwu na ọnọdụ ndị na-enweghị ike ịdaba.
Ọdịdị Tricone bits Structure
Nkọwa zuru ezu nke koodu ihe nlere egwu egwu
1- Milled Tooth Bit, nhazi dị nro (ike mkpakọ dị ala, nnukwu drillability)
2- Milled Tooth Bit, usoro siri ike na ọkara (ike mkpakọ dị elu)
3- Mpekere nha nha, siri ike, abrasive ma ọ bụ nke na-adịghị mma
4- Fanye Tooth Bit, nhazi dị nro (ike mkpakọ dị ala, nnukwu drillability)
5- Fanye Tooth Bit, dị nro ka ọ dị ọkara (ike mkpakọ dị ala)
6- Tinye nha nha, nhazi siri ike nke ọkara (ike mkpakọ dị elu)
7- Tinye nha nha, siri ike, abrasive ma ọ bụ nke na-adịghị mma
8- Fanye Tooth Bit, nke siri ike nke ukwuu, na-akpachapụ anya nke ukwuu
Ntuziaka nke nhọrọ Tricone Bit
| IDC | WOB (KN/mm) | RPM(r/min) | NKWUKWU NDỊ KWESỊRỊ |
| 114/116/117 | 0.3-0.75 | 180-60 | Nhazi dị nro nke nwere ike mkpakọ dị ala na nnukwu drillability, dị ka ụrọ, nkume apịtị, nzu, wdg. |
| 124/126/127 | 0.3-0.85 | 180-60 | Nhazi dị nro na ike mkpakọ dị ala na nnukwu drillability, dị ka mudstone, gypsum, nnu, limestone dị nro, wdg. |
| 134/135/136/137 | 0.3-0.95 | 150-60 | Akpụkpọ ụkwụ dị nro na nke ọkara na ike mkpakọ dị ala na nnukwu drillability, dị ka shale dị nro, gypsum siri ike, nkume nzu dị nro dị nro, nkume aja dị nro dị nro, nhazi dị nro na nke siri ike, wdg. |
| 214/215/216/217 | 0.35-0,95 | 150-60 | Nhazi nke etiti nwere ike mkpakọ dị elu, dị ka shale dị nro, gypsum siri ike, nkume nzu dị nro, nkume aja dị nro dị nro, nguzobe dị nro na nke siri ike, wdg. |
| 227 | 0.35-0,95 | 150-50 | Nhazi siri ike nke ọkara nwere ike mkpakọ dị elu, dị ka abrasive shale, limestone, sandstone, dolomite, gypsum siri ike, marble, wdg. |
| Mara: E kwesịghị iji oke oke WOB na RPM dị na tebụl dị n'elu mee ihe n'otu oge. | |||
Ntuziaka nke tricone Bits ChoiceỤdị nha nha nke Tricone
Nha ibe n'ibe
| Nha Bit | PIN REG API | Torque | Ibu | |
| Inch | mm | Inch | KN.M | Eze |
| 3 3/8 | 85.7 | 2 3/8 | 4.1-4.7 | 4.0-6.0 |
| 3 1/2 | 88.9 | 4.2-6.2 | ||
| 3 7/8 | 98.4 | 4.8-6.8 | ||
| 4 1/4 | 108 | 5.0-7.5 | ||
| 4 1/2 | 114.3 | 5.4-8.0 | ||
| 4 5/8 | 117.5 | 2 7/8 | 6.1-7.5 | 7.5-8.0 |
| 4 3/4 | 120.7 | 7.5-8.0 | ||
| 5 1/8 | 130.2 | 3 1/2 | 9.5-12.2 | 10.3-11.5 |
| 5 1/4 | 133.4 | 10.7-12.0 | ||
| 5 5/8 | 142.9 | 12.6-13.5 | ||
| 5 7/8 | 149.2 | 13.2-13.5 | ||
| 6 | 152.4 | 13.6-14.5 | ||
| 6 1/8 | 155.6 | 14.0-15.0 | ||
| 6 1/4 | 158.8 | 14.4-18.0 | ||
| 6 1/2 | 165.1 | 14.5-20.0 | ||
| 6 3/4 | 171.5 | 20.0-22.0 | ||
| 7 1/2 | 190.5 | 4 1/2 | 16.3-21.7 | 28.0-32.0 |
| 7 5/8 | 193.7 | 32.3-34.0 | ||
| 7 7/8 | 200 | 33.2-35.0 | ||
| 8 3/8 | 212.7 | 38.5-41.5 | ||
| 8 1/2 | 215.9 | 39.0-42.0 | ||
| 8 5/8 | 219.1 | 40.5-42.5 | ||
| 8 3/4 | 222.3 | 40.8-43.0 | ||
| 9 1/2 | 241.3 | 6 5/8 | 38-43.4 | 61.5-64.0 |
| 9 5/8 | 244.5 | 61.8-65.0 | ||
| 9 7/8 | 250.8 | 62.0-67.0 | ||
| 10 | 254 | 68.0-75.0 | ||
| 10 1/2 | 266.7 | 72.0-80.0 | ||
| 10 5/8 | 269.9 | 72.0-80.0 | ||
| 11 1/2 | 292.1 | 79.0-90.0 | ||
| 11 5/8 | 295.3 | 79.0-90.0 | ||
| 12 1/4 | 311.2 | 95.0-102. | ||
| 12 3/8 | 314.3 | 95.0-102.2 | ||
| 12 1/2 | 317.5 | 96.0-103.0 | ||
| 13 1/2 | 342.9 | 105.0-134.0 | ||
| 13 5/8 | 346.1 | 108.0-137.0 | ||
| 14 3/4 | 374.7 | 7 5/8 | 46.1-54.2 | 140.0-160.0 |
| 15 | 381 | 145.0-165.0 | ||
| 15 1/2 | 393.7 | 160.0-180.0 | ||
| 16 | 406.4 | 200.0-220.0 | ||
| 17 1/2 | 444.5 | 260.0-280.0 | ||
| 26 | 660.4 | 725.0-780.0 | ||
Ngwugwu TRICONE BITS
| Ọnụ ego kacha nta | N/A |
| Ọnụ ahịa | |
| Nkọwa nkwakọ ngwaahịa | Ngwungwu mbupu ọkọlọtọ |
| Oge Mbuga ozi | 7 ụbọchị |
| Usoro ịkwụ ụgwọ | T/T |
| Ikike inye | Dabere na usoro zuru ezu |
